LED is flashing). Immediately unplug the service PC's cable from the
Px and connect the Px to the customer's network. When the Px is
in Normal Mode, the Power LED will light green and the Port LEDs
will be dark. If this does not happen, unplug and re-plug the Px's
power supply.
-How do I give the Allworx Px 6/2 Expander a static IP address?
First, put the Px in Configuration Mode:
Remove the power and Ethernet cables from the Px unit.
Plug the power back into the Px unit. Make sure the Ethernet is not
connected. Wait for the Power and Port LEDs to go solid amber
(about 45 seconds). This indicates that it is in Configuration Mode.
Then, access the Px's admin web page from the service PC:
Connect the service PC directly to the unit using an Ethernet cable.
DHCP is enabled on the Px unit while in Configuration Mode.
Open a command window on the service PC by clicking Start, Run, then
typing cmd into the Open field then clicking OK.
On the command line in the window, type: ipconfig /release and press
the Enter key.
Once the command prompt is re-displayed, type: ipconfig /renew and
press the Enter key.
Once the command prompt is re-displayed, enter the Px's IP address
(192.168.2.254) into the address field of the PC's web browser and
click Go.
Change the Px's network settings:
Select Use Static Settings
Into the Px IP Address field, enter the Px's intended IP address.
Choose the network's Netmask from the Subnet Mask list.
Into the Gateway field, enter the network gateway IP address.
If the Px Password has not been set, set it by entering a password into
the New Password and Confirm Password fields. We recommend
using the Px's MAC address or use the same password as the
Allworx server. In any case, save a copy of the password.
Click Update.
Click Restart. Click OK on the confirmation boxes.
To get into Normal Mode, wait until the Restart sequence starts (Power
LED is flashing). Unplug the service PC's cable from the Px and
connect the Px to the customer's network.
-How do I configure the Allworx Px 6/2 Expander at a remote
location?
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern