Allworx 9212 Bedienungsanleitung PDF herunterladen (Seite 17)

Phone Guide – 9212

300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com

Revised: May 28, 2008

Page 13

6 System Features

6.1 Operator

Dialing (or transferring to) 0 from any phone will initiate a call to the company operator.

6.2 User / Resource Extensions

Dialing (or transferring to) any extension between the range of 100 – 299 (3 digit mode) or 1000 – 2999 (4 digit

mode) will connect a call to another user or to a call route (set up by the System Administrator) assigned to the

extension.

6.3 Leave a User a Voicemail

Dialing (or transferring to) any 3 + user extension will connect a call to a particular user’s voicemail.

Note: 3 + a resource extension only works if the extension routes directly to a user’s voicemail.

6.4 Business Speed Dial

The System Administrator can specify extensions 350 – 399 or 34000 – 34999 to ring particular numbers. The

System Administrator can program the extensions to a phone’s PFK.

6.5 Auto Attendant

Dialing (or transferring) to extension 400 or 431 from any phone will go to the default Auto Attendant.

Dialing (or transferring) to extension 431 - 439 from any phone will go to a specific Auto Attendant set up by

the System Administrator.

6.6 Overhead Paging

If the system is configured and connected to an Overhead Paging system, dialing extension 402 activates

paging. Once activated, users can use their phone to make an announcement that is transmitted through each

handset’s intercom or to the overhead paging system.

Note: An overhead paging system is a 3

party product attached to the Allworx system.

6.7 Active Door Relay

If the system is configured and connected to a Door Relay, dialing extension 403 activates the relay.

6.8 Do Not Disturb

Dialing extension 420 enables Do Not Disturb on the phone.

Dialing extension 421 disables Do Not Disturb on the phone.

Note: The MUTE/DND button will not be lit.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 29 30

Keine Kommentare

Allworx 9212 Bedienungsanleitung Seite 17