Allworx 9212 Bedienungsanleitung PDF herunterladen (Seite 19)

Phone Guide – 9212

300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com

Revised: May 28, 2008

Page 15

6.10 Call Forwarding

Dialing 45 + an extension will forward any call that come into the phone to that extension.

To disable Call Forwarding for the phone, dial extension 450.

6.11 Paging Zones

Dialing 46# (# representing a Paging Zones 0 through 9) on the phone will broadcast audio to any other

phones that are members of the Paging Zone, which is set up by the System Administrator.

6.12 Conference Center

The Conference Center is an optional feature. Note: it is not available for the Allworx 10x.

There are four Conferences Bridges on the 24x and one Conference Bridge on the 6x that support up to 8

callers. A Conference can be scheduled using the directory page but can also be held without scheduling.

Callers can join a Conference by dialing extension 408 or by being transferred to the extension 408 by another

user. An Auto Attendant shortcut can be setup by the System Administrator to access the Conference Center.

A Conference ID and password are required in order to enter the conference.

Note: For more information refer to the Allworx Conference Center Guide found on the website at

www.allworx.com/support/downloads/default.asp.

The 24x supports up to 4 simultaneous conferences while the 6x supports only one conference. Default

Conference IDs and Pins for unscheduled conferences are shown in the table below:

Server Conference ID Password

6x, 24x 480 480

24x 481 481

24x 482 482

24x 483 483

6.13 Allworx Message Center

The Allworx Message Center can be reached by:

1. Dialing 6 + your extension from any office phone or from the company Auto Attendant, if calling from an

outside line.

2. Pressing the MESSAGES button on any Allworx phone.

The Allworx Message Center allows the user to:

• Listen to new and saved voicemails

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 29 30

Keine Kommentare

Allworx 9212 Bedienungsanleitung Seite 19